Driv ing and pa rki ng, Driving tips – Mercedes-Benz S-Class 2013 Owners Manual User Manual

Page 334

Advertising
background image

more firmly. Maintain a safe distance from

vehicles in front.

After driving on a wet road or having the

vehicle washed, brake firmly while paying

attention to the traffic conditions. This will

warm up the brake discs, thereby drying them

more quickly and protecting them against

corrosion.

Limited braking performance on salt-

treated roads

G

WARNING

The layer of salt on the brake discs and the

brake pads/linings may cause a delay in the

braking effect, resulting in a significantly

longer braking distance, which could lead to

an accident.
To avoid this danger, you should:

R

occasionally brake carefully, without

putting other road users at risk, when you

are driving on salted roads. This helps to

remove any salt that may have started to

build up on the brake discs and the brake

pads/linings.

R

maintain a greater distance to the vehicle

ahead and drive with particular care.

R

carefully apply the brakes at the end of a

trip and immediately after commencing a

new trip, so that salt residues are removed

from the brake discs.

Servicing the brakes
!

If the red brake warning lamp lights up in

the instrument cluster and you hear a

warning tone while the engine is running,

the brake fluid level may be too low.

Observe additional warning messages in

the multifunction display.
The brake fluid level may be too low due to

brake pad wear or leaking brake lines.
Have the brake system checked

immediately. This work should be carried

out at a qualified specialist workshop.

All checks and maintenance work on the

brake system must be carried out at a

qualified specialist workshop. Consult a

qualified specialist workshop to arrange this.
Have brake pads installed and brake fluid

replaced at a qualified specialist workshop.

G

WARNING

If brake pads or brake fluid other than those

recommended are used, the braking

properties of the vehicle can be degraded to

an extent that safe braking is substantially

impaired. This could result in an accident.

!

Vehicles with 4MATIC: function or

performance tests may only be carried out

on a 2-axle dynamometer. If you are

planning to have the vehicle tested on such

a dynamometer, contact an authorized

Mercedes-Benz Center to obtain further

information first. Otherwise, you could

damage the drive train or the brake system.

!

Vehicles with 4MATIC: as the ESP

®

system operates automatically, the engine

and the ignition must be switched off

(SmartKey in position 0 or 1 in the ignition

lock or Start/Stop button in position 0 or

1) when the electric parking brake is being

tested on a brake dynamometer.
Braking maneuvers triggered automatically

by ESP

®

may seriously damage the brake

system.

!

Vehicles with 4MATIC: as the ESP

®

system operates automatically, the engine

and the ignition system must be switched

off (SmartKey in position 0 or 1 in the

ignition lock or Start/Stop button in

position 0 or 1) when:

R

testing the electric parking brake on a

brake dynamometer.

R

you intend to have the vehicle towed with

one of the axles raised.

Braking maneuvers triggered automatically

by ESP

®

may seriously damage the brake

system.

332

Driving tips

Driv

ing

and

pa

rki

ng

Advertising