Driving and parking, Driving systems – Mercedes-Benz S-Class 2013 Owners Manual User Manual

Page 369

Advertising
background image

Active Blind Spot Assist (

Y

page 367) and

Active Lane Keeping Assist (

Y

page 369).

Active Blind Spot Assist

Important safety notes
Active Blind Spot Assist uses a radar sensor

system to monitor the side areas of your

vehicle which are in back of the driver. A

warning display in the exterior mirrors draws

your attention to vehicles detected in the

monitored area. If you then switch on the

corresponding turn signal to change lane, you

will also receive an optical and audible

collision warning. If a risk of lateral collision

is detected, corrective braking may help you

avoid a collision. To support the course-

correcting brake application, Active Blind

Spot Assist also uses the forward-facing radar

sensor system. Active Blind Spot Assist

supports you from a speed of approximately

20 mph (30 km/h).

G

WARNING

Active Blind Spot Assist is only an aid, and

may detect vehicles/obstacles incorrectly or

not at all.
The system may be impaired or may not

function if:

R

there is poor visibility, e.g. due to snow,

rain, fog or spray.

R

the rear and/or front sensors are dirty.

Active Blind Spot Assist may not detect

narrow vehicles, such as motorcycles or

bicycles, or may only detect them too late. It

cannot detect vehicles that are overtaken at

a small distance and then enter the blind spot

area.
Active Blind Spot Assist cannot detect road

and traffic conditions. It is not a substitute for

attentive driving. You are responsible for the

vehicle's speed, braking in good time, and

steering correctly. Always adapt your driving

style to suit the prevailing road and weather

conditions. Always pay attention to traffic

conditions and your surroundings. Otherwise,

you may fail to recognize dangers in time,

cause an accident and injure yourself and

others.

i

USA only:

This device has been approved by the FCC

as a “Vehicular Radar System”. The radar

sensor is intended for use in an automotive

radar system only. Removal, tampering, or

altering of the device will void any

warranties, and is not permitted by the

FCC. Do not tamper with, alter, or use in

any non-approved way.
Any unauthorized modification to this

device could void the user’s authority to

operate the equipment.

For Active Blind Spot Assist to assist you

when driving, the radar sensor system must

be activated (

Y

page 389) and operational.

Monitoring area
Active Blind Spot Assist monitors the area up

to 10 ft (3 m) behind your vehicle and directly

next to your vehicle, as shown in the diagram.

For this purpose, Active Blind Spot Assist

uses radar sensors in the rear bumper.

G

WARNING

Active Blind Spot Assist monitors certain

areas in the immediate vicinity of your vehicle.

Vehicles that approach and drive past at high

speeds are not detected. No visual nor

Driving systems

367

Driving

and

parking

Z

Advertising