Comand, System settings – Mercedes-Benz S-Class 2013 Owners Manual User Manual
Page 150
Time settings
General information
If COMAND is equipped with a navigation
system and has GPS reception, COMAND
automatically sets the time and date. You can
also adjust the time yourself in 30-minute
increments, but the date cannot be changed.
i
If you set the time in 30-minute
increments, any time zone settings and
settings for changing between summer and
standard time are lost (
Y
page 148).
i
The following navigation system functions
require the time, time zone and summer/
standard time to be set correctly in order
to work properly:
R
route guidance on routes with time-
dependent traffic guidance
R
calculation of expected time of arrival
Setting the time
X
Select
Vehicle
in the main function bar by
turning cVd the COMAND controller and
press W to confirm.
X
Select
System
by turning cVd the
COMAND controller and press W to
confirm.
X
Select
Time
by turning cVd the COMAND
controller and press W to confirm.
X
Select
Time
and press W to confirm.
:
Setting the time
;
Current date (set automatically by
COMAND)
X
Set the time by turning cVd the COMAND
controller and press W to confirm.
Setting the time/date format
X
Select
Vehicle
in the main function bar by
turning cVd the COMAND controller and
press W to confirm.
X
Select
System
by turning cVd the
COMAND controller and press W to
confirm.
X
Select
Time
by turning cVd the COMAND
controller and press W to confirm.
X
Select
Format
and press W to confirm.
The # symbols show the current settings.
Abbreviation
Meaning
DD
/
MM
/
YYYY
Day/Month/Year
(date format)
HH
/
MM
Hours/Minutes
(time format)
You can set the 24-hour or the AM/PM
format.
X
Set the format by turning cVd the
COMAND controller and press W to
confirm.
Setting the time zone and switching
between summer and standard time
X
Select
Vehicle
in the main function bar by
turning cVd the COMAND controller and
press W to confirm.
X
Select
System
by turning cVd the
COMAND controller and press W to
confirm.
X
Select
Time
by turning cVd the COMAND
controller and press W to confirm.
148
System settings
COMAND