Mercedes-Benz R-Class 2009 Owners Manual - Manual (Page 116)

Memory function
114
Memory function
Notes
With the memory function you can store up
to three different configurations per front
seat.
Each memory position button on the driver’s
side can store all of the following settings:
R Seat position
R Multicontour seat: previously saved setting
R Steering wheel position
R Exterior rear view mirrors’ position
G Warning!
Do not activate the memory function while
driving. Activating the memory function
while driving could cause the driver to lose
control of the vehicle.
Each memory position button on the front
passenger side can store all of the following
settings:
R Seat position
R Multicontour seat: previously saved setting
M Memory button
1, 2, 3 Memory position button
Storing positions into memory
X Adjust the seats.
X On the driver’s side, additionally adjust the
steering wheel and exterior rear view
mirrors to the desired positions.
X Press memory button M.
X Release memory button M and press
memory position button 1, 2 or 3 within
3 seconds.
When the settings are stored to the
selected position, an acknowledgement
signal sounds.
Recalling positions from memory
X Press and hold desired memory position
button
1, 2 or 3 until the seat has
completely moved to the stored position.
On the driver’s side, also wait for the
steering wheel and exterior rear view
mirrors to move to the stored position.
i Releasing the memory position button
stops movement to the stored positions
immediately.
Controls in detail