Mercedes-Benz R-Class 2009 Owners Manual - Manual (Page 362)

Replacing bulbs
360
X Gently press the new bulb into bulb socket
2 .
X Place bulb socket 2 back into the housing
and turn it clockwise until it engages.
Parking and standing lamp bulb
1 Bulb socket for parking and standing lamp
bulb
X Turn bulb socket 1 with the bulb
counterclockwise and remove it.
X Pull the bulb out of bulb socket 1 .
X Gently press the new bulb into bulb socket
1 .
X Place bulb socket 1 back into the housing
and turn it clockwise until it engages.
Front fog lamp bulb
! If not done carefully and properly, damage
to the bumper can result. It is
recommended to have this work carried out
at an authorized Mercedes-Benz Center.
1 Front fog lamp or corner-illuminating front
fog lamp
2 Cover
3 Screws
X Remove screws 3 .
X Take off cover 2 .
4 Screws
X Remove screws 4 .
X Remove front fog lamp 1 .
i An additional adapter cable is used to
connect the bulb socket with the vehicle’s
electrical circuit. Reuse the adapter cable
after replacing the bulb.
X Disconnect the adapter cable.
Practical hints