Controls in detail – Mercedes-Benz R-Class 2009 Owners Manual User Manual

Page 220

Advertising
background image

Loading and storing

218

1

Holder behind B-Pillar

2

Holder behind C-Pillar

R

With the cargo volume expanded in part
(

Y

page 210), use holders behind C-pillars

2

and the cargo tie-down rings in the third-

row footwell (

Y

page 209).

R

With the cargo volume fully expanded
(

Y

page 211), use holders behind B-pillars

1

and the cargo tie-down rings in the

second-row footwell (

Y

page 209).

X

Open the hook and loop fasteners on the
cargo net package.

X

Roll out the cargo net.

X

Unfold the cargo net.

X

Engage the lower cargo net bar.
The cargo net bar must engage audibly.

Installing the cargo net

Cargo net installed behind the C-pillar
1

Holder

2

Cargo net bar

3

Cargo net bar

X

Hang cargo net bar

2

on holder

1

as

indicated by the arrow.

X

Push cargo net bar

2

forward into holder

1

in direction of arrow.

X

Engage cargo net bar

3

.

The cargo net bar must engage audibly.

Pulling the cargo net tight

Belt hook attached in the third-row footwell
1

Belt hook

2

Cargo tie-down ring

3

Tightening belt

X

Hook belt hook

1

into cargo tie-down ring

2

in direction of arrow.

X

Pull tightening belt

3

by the loose end in

direction of arrow until the cargo net is
pulled tight.

X

After driving a short distance, make sure
the cargo net is still tight and, if necessary,
pull it tight again.

Controls in detail

Advertising