Emergency operation (limp-home mode), Transfer case, Instrument cluster – Mercedes-Benz R-Class 2009 Owners Manual User Manual

Page 145: Introduction, Controls in detail

Advertising
background image

Instrument cluster

143

Emergency operation (limp-home

mode)

If vehicle acceleration becomes less
responsive or sluggish or the automatic
transmission no longer shifts, the automatic
transmission is most likely operating in limp-
home (emergency operation) mode. In this
mode only second gear and reverse gear

R

can be selected.

X

Stop the vehicle in a safe location.

X

Shift the automatic transmission into park
position

P.

X

Turn off the engine.

X

Wait at least 10 seconds before restarting.

X

Restart the engine.

X

Shift the automatic transmission into drive
position

D (for second gear) or reverse gear

R.

X

Have the automatic transmission checked
at an authorized Mercedes-Benz Center as
soon as possible.

Transfer case

The vehicle is equipped with all-wheel drive
(4MATIC). Both the front and rear axles are
powered at all times when the vehicle is being
operated.

!

Only conduct operational or performance

tests on a two-axle dynamometer. If such
tests are necessary, contact an authorized
Mercedes-Benz Center. You could
otherwise seriously damage the brake
system or the transfer case which is not
covered by the Mercedes-Benz Limited
Warranty.

!

Because the ESP

®

operates

automatically, the engine and ignition must
be shut off (SmartKey in starter switch
position

0 or 1 or KEYLESS-GO start/stop

button in position

0 or 1) when the parking

brake is being tested on a brake test
dynamometer. Such testing should be no
longer than 10 seconds.
Active braking action through the ESP

®

may otherwise seriously damage the brake
system which is not covered by the
Mercedes-Benz Limited Warranty.

Instrument cluster

Introduction

For a full view illustration of the instrument
cluster, see “Instrument
cluster” (

Y

page 30).

G Warning!

No messages will be displayed if either the
instrument cluster or the multifunction
display is inoperative.
As a result, you will not be able to see
information about your driving conditions,
such as speed or outside temperature,
warning/indicator lamps, malfunction/
warning messages or the failure of any
systems. Driving characteristics may be
impaired.
If you must continue to drive, please do so
with added caution. Contact an authorized
Mercedes-Benz Center as soon as possible.

Controls in detail

Z

Advertising