Mercedes-Benz R-Class 2009 Owners Manual - Manual (Page 154)

Control system
152
X Press button è or ÿ repeatedly until
the Vehicle status message memory
menu appears in the multifunction display.
If conditions have occurred causing status
messages to be recorded, the number of
messages appears in the multifunction
display:
X Press button j or k .
The stored messages will now be displayed
in the order in which they have occurred.
For malfunction and warning messages,
see “Vehicle status messages in the
multifunction display” (
Y page 305).
i After you have scrolled through all
recorded status messages, the first
recorded message appears again.
Should the vehicle’s system record any
conditions while driving, the number of
messages will reappear in the multifunction
display when the SmartKey in the starter
switch is turned to position 0 or removed
from the starter switch. With KEYLESS-GO,
the number of messages will reappear when
you turn off the engine by pressing the
KEYLESS-GO start/stop button and open the
driver’s door.
Except for high-priority messages, the vehicle
status message memory will be cleared when
you switch off the ignition.
Settings menu
Introduction
In the Settings menu there are two
functions: The function To reset, press
reset button for 3 seconds, with which
you can reset all the settings to the original
factory settings and a collection of submenus
with which you can make individual settings
for your vehicle.
The following settings and submenus are
available in the Settings menu:
R Resetting to factory settings ( Y page 152)
R Submenus in the Settings menu
(
Y page 153)
R Instrument cluster submenu ( Y page 154)
R Time/Date submenu ( Y page 155)
R Lighting submenu ( Y page 156)
R Vehicle submenu ( Y page 158)
R Comfort submenu ( Y page 158)
Resetting to factory settings
You can reset the functions of all submenus
to the factory settings.
For safety reasons, the function Lamp
Circuit Headlamp in the Lighting
submenu cannot be reset while driving.
The following message appears in the
multifunction display:
Settings
Cannot be
completely reset
to factory settings
while driving.
X Press button è or ÿ repeatedly until
the Settings menu appears in the
multifunction display.
Controls in detail