Mercedes-Benz R-Class 2009 Owners Manual - Manual (Page 218)

Loading and storing
216
X Rolling out blind: Pull blind on handle 1
across the cargo compartment.
X Guide blind into mounts 2 and release.
X Rolling up blind: Disengage blind and
guide retraction by its handle 1 .
Removing and installing blind
Blind installed behind second-row seats
1
Release button
2 Blind
X Removing: Roll up blind 2 .
X Push release button 1 .
X Pull blind 2 to the left until it engages.
X Installing: For installation behind second
row seats, install the blind extensions
(
Y page 217).
! For installation behind third-row seats,
the blind extensions must not be installed.
Otherwise, blind could be damaged.
X Remove the mount covers in the side trims
of the third seat row when installing roller
blind
2 behind the second-row seats.
Mount cover behind second-row seats
X Press on cover at its lower edge as
indicated by arrow.
The cover’s upper edge flips up.
X Remove cover by pulling its upper edge out
of side trim in direction of arrow.
i To avoid loss of the covers, keep them in
a safe place while not in use, e.g. the glove
box.
X Make sure release button 1 faces up and
the roller blind handle ( Y page 215) is to
the rear before inserting the roller blind.
X Place left side of blind 2 in left mount.
X Position right side of blind 2 over right
mount.
X Press release button 1 and guide blind
2 into mount.
X Make sure the cargo compartment cover
blind is securely fastened.
Controls in detail