QOMO QClick V7 - Manual (Page 137)

Copyright © 2012 All Rights Reserved by QOMO HiteVision.
www.qomo.com 137
Part 5. QRF300 Hardware & System
Installation Illustration
5.1 Student keypad
5.1.1 Specifications
Dimensions (l w h): 104mm x 49mm x15 mm
Buttons on Remote: ③ Rush Quiz, ④ A-F
Power required: 2 AAA Batteries
Transmission distance: ~200 feet
Battery life: > 6 months
Function: Transmit response signals
Each student keypad is labeled with an ID number. The ID number can be set and reset by the
manager. This feature is ver
y important, if one student keypad is lost or damaged, don’t worry, you
can replace a spare remote by just resetting its ID number.
5.1.2 Illustration
1. Transmission window
2. Indicator light
3. Button for “Rush Quiz” activity mode
4. Choice buttons, labeled “A” to “F”
Note:
Each of the clickers is battery operational. Insert two “AAA” batteries,
into the port on the back of the clicker as indicated on the hardware.
Slide the back plate into place. For a more secure closure, use the
screwdriver to insert the screw. The Screws and screwdriver are
provided for your convenience. Do not over tighten in order to avoid
stripping the screw. When the batteries have expired, remove the
screw and back plate and replace the batteries with fresh ones. Re-
secure the back plate and screw, as necessary.
Enclosed in this package are the following items