QOMO QClick V7 - Manual (Page 79)

Copyright © 2012 All Rights Reserved by QOMO HiteVision.
www.qomo.com 79
(2) If you select YES, the student keypad will display the question contents when the
exam begins. Press the “OK” Left Soft Key to confirm the operation,
(3) You may choose ViewQuestions to view the question contents. Use the
Left /Right Key to scroll the next or previous question contents.
7. Press the Start/Pause Key to start or pause a session. When the session starts, the
running time set for each question will be displayed on the screen. You may increase or
decrease the test time by pressing the Up Key or Down Key . Each key press
will increase or decrease the time by 5 seconds. Press the Stop Key to stop the
current question response. Use the Slide Up Key or Slide Down Key to go to
the previous or next question. The current question number over the total question number
also shows on the instructor clicker screen.
8. Press “Return” Right Soft Key to complete the current session. The display will prompt
you to confirm the exit. Enter the session name and then press Menu/OK Key to save
the conducted session into the instructor clicker.