QOMO QClick V7 - Manual (Page 64)

Copyright © 2012 All Rights Reserved by QOMO HiteVision.
www.qomo.com 64
4. Press the Menu/Ok Key to confirm the setting.
Note: The default time setting is 2 minutes.
Note: If the clicker does not have any interaction for the period of time set in the Screen Saver, the
clicker will enter into a sleep mode which will shut down the screen’s display. The user can press
any key to wake up the keypad and return to the previous display. For additional battery life savings,
you should turn off the power of the clicker.
2.1.2.2.10 Routine steps using the student keypad

Taking a quiz with the pace controlled by the instructor
Student Keypad Operation Form
Form Class Status Is the Student
ID
in the
class list?
Actions Result
1 Offline (No class
selected)
N/A All
Actions No Host Display
2 Class logged in but
the quiz has not
started. N/A Joining
the class Receives message “Wait
to Start”
3 The quiz is loaded
and ready to begin
but the timer has not
started. No Joining
the class Receives message
“Invalid ID” and the
software will display Force
Login window.
4 The quiz is loaded
and ready to begin
but the timer has not
started. Yes Joining
the class Registered for the class
and receives the register
number.
The LCD
displays the register
screen.
5 The quiz is loaded
and ready but the
timer
has not
started. The student
keypad joined the
class previously.
Yes Power
Up
You can press “Send”
key to directly logon
back to previous class.
The LCD displays the
register screen.