QOMO QClick V7 - Manual (Page 49)

Copyright © 2012 All Rights Reserved by QOMO HiteVision.
www.qomo.com 49
Change the Channel on the Teacher Remote
Click on the teacher tab in the Set Remote ID window. Follow the directions to change the remote
channel as listed in the window.
1.4.4.3.2 Hardware Test
Hardware Test is used to check the communication of the main receiver, instructor remote, and the
student remote. All settings require the user to log in the system to perform.
Hardware Test for QRF900 & QRF700
To use the hardware test tool for QRF700 and QRF900, follow these steps:
Click on the Hardware Test button to check that the remotes are communicating with
the dongle receiver.