Part 2, Qrf900 hardware & system installation illustration, Student keypad – QOMO QClick V7 User Manual
Page 51: Specifications, Illustration, 1 student keypad, 1 specifications, 2 illustration
Copyright © 2012 All Rights Reserved by QOMO HiteVision.
www.qomo.com
51
Part 2. QRF900 Hardware & System
Installation Illustration
2.1 Student Keypad
2.1.1 Specifications
Dimensions (L× W× H): 5 inches x 2 inches × 1 inch
Keys: 21
Power required: 2 AA Batteries
RF transmission distance: ~200 feet
Battery life: Depends upon use or up to 6 months
Function: Transmit response signals
Note:
Each of the clickers is battery operated. Insert two “AA” batteries into
the port on the back of the clicker as indicated on the hardware. Slide
the back plate into place. For a more secure closure, use the
screwdriver to insert the screw. The screws and screwdriver are
provided for your convenience.
2.1.2 Illustration
2.1.2.1 Student Keypad Layout
1. LCD: Color display
2. Power: Turns the unit on and off
3. Left Soft Key
: Confirms the operation which appears on the bottom left of the screen
4. Up Key
: Scrolls the screen display up
5. Right Soft Key
: Confirms an operation that appears at the bottom right of the screen; when
exiting from the answer screen during homework or paper quiz mode, this button is also used to