SINGER 9340 SIGNATURE - Manual (Page 29)

PATTERN BALANCE ADJUSTMENT
If decorative stitch patterns, letter, numbers or the manual buttonhole are uneven
when sewn on a particular fabric, adjust them with the pattern adjustment dial.
Use a screwdriver to turn the dial slightly toward the "+" or " ".
–
The pattern adjustment dial normally should be
in the horizontal position.
Adjusting distorted stretch stitch patterns
A.When Patterns are too compressed, correct by
turning the dial in the direction of "
B. Correct setting.
C.When Patterns are too drawn out, correct by
turning the dial in the direction of "+".
–".
Adjusting distorted letters or numbers
A.When the letters or numbers are overlap, turn
the dial to " ".
B. Correct setting.
C.When the patterns are too drawn out, correct
by turning the dial to "+".
–
Note: Always test sew the pattern on a piece of fabric that is the same as the fabric used for
your project.
Adjusting the stitch density for buttonhole
A.Buttonhole is too dense, correct by turning the
dial to " ".
B.Correct setting.
C.Buttonhole is less dense, correct by turning the
dial to "+".
–
24