SINGER 9340 SIGNATURE - Manual (Page 66)

* The invisible zipper foot is an optional accessory.
This foot provides a hidden closing on skirts, dresses and other garments.
1. Before closing the seam on your project, use a fabric marker to mark the desired bottom end of
the zipper on both sides of the zipper opening.
2. Fold in and press the seam allowances of both opening edges and open out the pressed edges.
3. With right sides together, place the first half of the opened zipper along the first edge of the
opening, ensuring that the teeth of the zipper end at the creased edge.
4. Baste in place.
5. Place the fabric under the presser foot, so that the teeth of the zipper are lined up with the
groove of the zipper foot. Topstitch the zipper in place, ensuring that the needle penetrates the
tape of the zipper close to the teeth. Continue sewing until the presser foot reaches the zipper's
slider, backstitching at the end of the seam.
6. On the opposite side, close the zipper. With right sides together, make sure the two sides of the
zipper are properly aligned. Pin in place, open the zipper and baste in place.
7. Place the fabric under the presser foot, so that the teeth of the zipper are again lined up with the
groove of the zipper foot. Topstitch the zipper in place, ensuring that the needle penetrates the
tape of the zipper as close to the teeth as possible.
8. Continue sewing the second seam until the presser foot reaches the zipper's slider, backstitching
at the end.
9. Close the zipper and fold the fabric so that the seam allowances lay on top of each other. Pin
the seam in place. Finish the seam by sewing towards the inserted zipper.
61
This foot is used when sewing difficult fabrics, such as leather or vinyl.
1. Select desired stitch.
2. Sew slowly and guide the layers.
* The non-stick foot is an optional accessory.
INVISIBLE ZIPPER FOOT
1
2.0~4.5
NON-STICK FOOT