SINGER 9340 SIGNATURE - Manual (Page 53)

Attention: Zipper foot should be used with
machine set for straight stitch only. Care
should be given when choosing needle
position as the needle could hit the presser
foot and break when sewing with an altered
needle position or with any other pattern.
48
ZIPPER INSERTION
1 Baste the zipper opening on the garment.
2 Press open the seam allowance. Place the
zipper face down on the seam allowance
with the teeth against the seam line. Baste
the zipper tape in place.
I
3.5 1.5~3.0
2
3 Attach the zipper foot. Attach the right side
of the presser foot pin to the holder when
sewing the left side of the zipper.
4 Attach the left side of the presser foot pin to
the presser foot holder when sewing the
right side of the zipper.
3
4
5 Stitch the left side of the zipper from the
bottom of the zipper to the top.
6 Stitch across the lower end and right side of
zipper. Remove the basting and press.
6
5
1
1
Inserting a centered zipper
6
2
2 inch
1
3 4
5