SINGER SEQS-6000 FUTURA QUARTET Instruction Manual User Manual

Page 15

Advertising
background image

13

Stitch length and width/needle position controls

*Auto/Default settings

Your sewing machine will produce most of your stitching

requirements at an Auto/Default Stitch Length and Width. When

a pattern is selected, it will automatically sew at default settings of

stitch length, width and needle position for straight stitch.

Auto (preprogrammed) default settings are easily determined

by moving the Stitch Length and Width / Needle Position

Control Knob. The LED Indicator next to the Control will light

in orange without blinking and a beep will sound indicating you

are at the Auto / Default Position.

*Manual settings

Once you have determined the Auto / Default position you can

manually change the length, width or straight stitch needle

postition according to your preference. Starting at the Auto

position, slide the control knob left or right to locate each of

the potential adjustments. At each manual adjustment point,

the LED will blink 3 times in green and a beep will sound.
The LED will light in red beyond the potential adjustment range.

NOTES: 1. Some patterns offer more opportunities for

manual adjustments than others.

2. An alternate method of determining

available adjustments is to move the

control knobs while sewing slowly.

Twin needle mode button

The width setting for twin needle sewing can be activated if it is

available for the selected pattern. The LED turns on when twin

needle sewing is activated.
Width setting for twin needle sewing can be activated, if it

is available for a selected pattern. LED turns on when twin

needle sewing is activated.

Advertising
This manual is related to the following products: