Installation of software – SINGER SEQS-6000 FUTURA QUARTET Instruction Manual User Manual

Page 39

Advertising
background image

37

INSTALLATION OF SOFTWARE

In order to start using the software on your PC you would

have to first install the contents of the CD to your PC.

This procedure is refered to as

“installation procedure”.

Please follow the below listed instructions in order to

successfully install FUTURA on your personal computer.

The FUTURA software comes on a CD-ROM disc.

In most personal computers the default drive setting for a

CD-ROM drive is “D:”

Please insert the FUTURA CD-ROM into the CD-ROM disc

receiver in your PC.

After some seconds, the Installation procedure of the software

will start automatically.

If after a short while, the software doesn’t automatically

start the installation process, you may start the installation

procedure manually by going to the “Start” option of Windows,

select “Run”, type “D:\FuturaStart.exe” and click on OK.

After some seconds the step-by-step installation of the

software begins with the Welcome window.

Click on “Next” to move on to the next screen.

After reading and agreeing with terms given in the

License Agreement, please click on “Yes”, and again click

on

Next, and then select the directory where the software

should be installed.

It is highly recommended to use the

selected default directory.

Simply click on

“Next” to continue.

CD-ROM

Advertising
This manual is related to the following products: