Tjernlund SS2 SideShot with UC1 Universal Control (Version X.02) 8504105 Rev 07/02 - Manual

Copyright © 2002, Tjernlund Products, Inc. All rights reserved. P/N 8504105
OWNER INSTRUCTIONS, DO NOT DESTROY
Recognize this symbol as an indication of important safety information!
NOTE: MAXIMUM FLUE GAS TEMPERATURES MUST NOT EXCEED 650oF
(343
O C) MINIMUM TEMPERATURE MUST BE 250 O F (121 O C) AT VENT
SYSTEM INLET.
THESE INSTRUCTIONS ARE INTENDED AS AN AID TO QUALIFIED, LICENSED SERVICE PER-
SONNEL FOR PROPER INSTALLATION, ADJUSTMENT AND OPERATION OF THIS UNIT.
READ THESE INSTRUCTIONS THOROUGHLY BEFORE ATTEMPTING INSTALLATION OR
OPERATION. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN IMPROPER
INSTALLATION, ADJUSTMENT, SERVICE OR MAINTENANCE POSSIBLY RESULTING IN FIRE,
ELECTRICAL SHOCK, CARBON MONOXIDE POISONING, EXPLOSION, PERSONAL INJURY
OR PROPERTY DAMAGE.
NOTE: Oil b urner capacities exceeding 1 GPH may require the burner to be adjusted to more
efficient (12.5-13% CO
2
) than typical levels to maintain recommended over-fire draft
settings. See “Oil Draft Adjustment Procedure” on page 16 of this manual or consult
factory at 1-800-255-4208 with questions prior to installation.
!
!
DO NOT DESTROY. PLEASE READ CAREFULLY AND
KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.
MODEL SS2
INSTALLATION INSTRUCTIONS
REV. 7/02
TJERNLUND PRODUCTS, INC.
1601 Ninth Street • White Bear Lake, MN 55110-6794
PHONE (651) 426-2993 • (800) 255-4208 • FAX (651) 426-9547
Visit our web site • www.tjernlund.com
CAUTION: The owner of the SS2 must keep the area around the vent terminal
free of snow, ice and debris.
INCLUDES NEW UC1
UNIVERSAL CONTROL