Tjernlund SS2 SideShot with UC1 Universal Control (Version X.02) 8504105 Rev 07/02 User Manual
Page 2
1
Address all correspondence to:
Customer Service • Tjernlund Products, Inc. • 1601 Ninth Street • White Bear Lake, MN 55110-6794
Call us toll free at 800-255-4208, visit our web site @ www.tjernlund.com or email us at [email protected].
TABLE OF CONTENTS
Description and Specifications ....................................................................................................................................1, 2
Installation Restrictions .................................................................................................................................................2
Cautions .........................................................................................................................................................................3
Safety Inspection of a Previously Used Appliance .........................................................................................................3
SideShot
®
Model SS2 Terminology ................................................................................................................................3
SideShot
®
With Integral UC1 Universal Control Board Features ...................................................................................4
LED Status & Fault Indicators .........................................................................................................................................4
Pre / Post-Purge & Prover Status Check Settings...........................................................................................................5
Vent Hood Termination Clearances
U.S. Installations............................................................................................................................................... 6
Canadian Installations .................................................................................................................................. 6, 7
Installation
Tools Required .................................................................................................................................................7
Vent System Installation .........................................................................................................................8, 9, 10
Installation of Vent Pipe ..................................................................................................................................10
Electrical Wiring
Warnings, Sequence of Operation & Internal Schematic ...............................................................................11
Wiring to Oil Fired Equipment ............................................................................................................12, 13, 14
Wiring to Gas Fired Appliance .................................................................................................................14, 15
Draft Adjustment Procedure (Oil) ..................................................................................................................................16
Draft Adjustment Procedure (Gas) ..........................................................................................................................16, 17
Combustion Air ............................................................................................................................................................. 17
Final System Operation Check Out ..............................................................................................................................17
Troubleshooting Oil Odors.......................................................................................................................................17, 18
Troubleshooting Electrical Problems .......................................................................................................................18, 19
Maintenance ............................................................................................................................................................19, 20
How to Obtain Service...................................................................................................................................................20
Warranty & Replacement Parts ...............................................................................................................................20, 21
SS2 Vent Cabinet Mounting Template (INSERTED)
SideShot
®
is a registered trademark of Tjernlund Products, Inc. for their Models SS1 & SS2 Vent Systems.
DESCRIPTION
The SS2 is a mechanical vent system designed and listed for use with natural draft oil or gas heating equipment. It is factory
assembled and wired. The SS2 automatically vents the flue gases from heating equipment to the outdoors. By recirculating
indoor air with a cooling fan, surrounding combustible materials remain at safe temperatures. After each burner cycle the SS2 will
continue to operate in post-purge mode to purge the heater and vent of residual flue gases. A factory post-purge time is set at 2
minutes and is adjustable up 16 minutes, see “Pre / Post-purge Settings” on page 5. The SS2 features a safety system consisting
of the integral UC1 Universal Control, a Fan Proving Switch and a High Limit temperature control. These devices monitor the
SS2’s performance and will interrupt the main burner if a venting malfunction is detected.
APPLICATION TABLE
Verify that the total BTU/hr. input of the heating appliance(s) fall within the inputs listed below. The BTU/hr. capacity range is
based on a maximum of 50 equivalent feet (15 meters). To determine equivalent feet, add the total length of straight vent pipe
plus 10 feet (3 meters) for each 90 degree elbow and 5 feet (1.5 meters) for each 45 degree elbow. Vent runs of over 15 linear
feet (4.5 meters) require the use of an approved, insulated vent connector to prevent problems related to condensation.
The SS2 Vent System may only be used on Flame Retention Head Oil Burners for oil installations.
Oil burner capacities exceeding 1 GPH may require the burner to be adjusted to more efficient (12.5-13% CO2) than typical
levels to maintain recommended over-fire draft settings. See “Oil Draft Adjustment Procedure” on page 16 of this manual or
consult Tjernlund at 1-800-255-4208 with questions prior to installation.
MODEL
FLAME RETENTION
FAN ASSISTED
MAX. EQUIV.
OIL BURNER
NATURAL & LP GAS
FEET
2001019
SS2
BTU / hr.
70,000 - 168,000
BTU / hr.
40,000 - 150,000
50
BTU / hr.
40,000 - 125,000
NATURAL & LP GAS
ATMOSPHERIC