Vinten Radamec Fusion CP4 - Manual (Page 15)

13
Configuration
Pan and Tilt Settings
Zoom Settings
Focus Settings
Changes the direction the camera head moves
in the pan (horizontal) axis when the joystick is
used. Tap to select Normal or Reverse from
the drop down menu.
Changes the direction the camera head moves
in the tilt (vertical) axis when the joystick is
used. Tap to select Normal or Reverse from
the drop down menu.
The deadband setting represents the minimum
amount the joystick has to be moved before it
starts to move the camera head. Tap the arrow
buttons to raise or lower the value (between 0
and 50). The higher the number, the more the
joystick has be moved before the selected
camera head moves.
Tap to select from the drop down menu how
the camera zoom can be controlled. The
options available are Joystick Only, Rocker
Switch Only or Both. See the section
Controlling Camera Lens Movement on
page 19.
Changes the direction the lens zoom moves
when either the joystick or rocker switch are
used. Tap to select Normal or Reverse from
the drop down menu.
Pan Orientation
Tilt Orientation
Deadband
Zoom Control
Orientation
Tap to select Normal or Fine from the drop
down menu. The Fine setting gives four times
less zoom response for the same degree of
control movement.
The deadband setting represents the minimum
amount the zoom control (joystick or rocker
switch) has to be moved before it starts to
move the camera lens zoom. Tap the arrow
buttons to raise or lower the value (between 0
and 50). The higher the number, the larger the
deadband area on the zoom control.
Changes the direction the lens focus moves
when the focus wheel is used. Tap to select
Normal or Reverse from the drop down menu.
Tap to select Normal or Fine from the drop
down menu. The Fine setting gives four times
less focus response for the same degree of
control movement.
The deadband setting represents the minimum
amount the focus wheel has to be moved
before it starts to move the camera lens focus.
Tap the arrow buttons to raise or lower the
value (between 0 and 50). The higher the
number, the larger the deadband area on the
focus wheel.
Sensitivity
Deadband
Orientation
Sensitivity
Deadband