Vinten Radamec Fusion CP4 - Manual (Page 24)

22
Operation
Managing a Show
The stored shots representing different camera heads and camera
positions on the shot grid can be saved as a collective setup called a
show. The CP4 retains the shows contents for use on the next power
up. The show can also be named and saved onto a USB stick as a
backup copy.
When required, the show can be loaded back from the USB stick onto
the same or another CP4 panel in the system. All the original shot
details and assigned camera heads are retained and available for
selection.
Naming a Show
1.
From the Show Menu tap to
select Rename Show.
2. Enter a new name
for the show using
the onscreen
keyboard and tap
Enter or OK to
save.
Saving a Show
1.
Insert a USB stick into either of the USB sockets on the rear of the
CP4.
2. From the Show Menu tap to select Save Show As.
3. In the Select File window enter a filename for the show. This does
not have to be the same name given to the show on the CP4.
4. Tap OK to save the show. After saving, there is no USB
disconnection procedure and therefore the USB stick can be
removed at any time.
Show1
OK Cancel
Show1
Morning show
Morning Show.shw
Morning Show.shw
OK Cancel