Vinten Radamec Fusion CP4 - Manual (Page 16)

14
Configuration
Miscellaneous Settings
Camera Heads Configuration
The CP4 will auto-detect all available camera heads connected to the
network. The camera heads can then be connected to the panel for
configuration and control. The parameters of each individual camera
head can be set up to suit the requirements of the individual user or the
system installation.
Camera Management Window
From the Home Screen, tap to open the Main Menu and select
Camera Management.
Adding and Managing Camera Heads
In Available Cameras (left hand panel) on the Camera Management
screen, all available camera heads are listed. From here, camera
heads can be added to the camera bin on the Home Screen.
Camera Head Connection and Control
When a camera head has been added to the camera bin, it can be
controlled by the CP4. The parameters of each individual camera head
can also be viewed and configured.
1. Tap to select the camera head
from the Available Cameras list.
Selecting the checkbox allows this CP4 to
take control of a camera head currently
being operated by another CP4 in the
system.
A time (in seconds) entered in the field
here will be used as the default fade time
for all future stored shots.
Note
Settings changed in the Controls window are only
applied and saved for the user name currently logged in.
Take Rudely
Default Fade Time
Available Cameras (4)
Cameras On Grid (3) Position
1
2
3
Camera1
C42-00A
Idle
Camera2
54B-06F
Disconnected
Camera3
709-FC8
On shot
Camera4
537-5EF
Disconnected
Camera Management
Use the arrows to change
the position of the camera
head in the camera bin
The current camera head
position in the camera bin
Select the checkbox to add
the camera head to the
camera bin
Connected camera heads
and operational status
Camera4
537-5EF
Disconnected