Vinten Radamec Fusion FCS-16 - Manual (Page 14)

12
Illustrations Page
Fig 1 FCS-16 Fusion Control System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Fig 3 Main Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Fig 4 Configuration Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Fig 5 Fusion pedestal targeting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Fig 6 SP-2000 pedestal targeting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Fig 7 Fusion target origin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Fig 8 Grid size configuration screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Fig 9 Multiple target configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Associated Publication
Vinten Radamec FCS-16 Fusion Control System
Technical Manual
Part No. V4035-4990
Usage
The FCS-16 Fusion Control System is designed for use in television studios to remotely control cameras, pan
and tilt heads and pedestals. The FCS-16 Fusion Control System is intended to be used by television camera
operators.
WARNING! 1. Do NOT attempt to use this product if you do not understand how to
operate it.
2. Do NOT use this product for any other purpose than that specified in the
Usage statement above.
3. This product has been designed for indoor use. Protect from water, mois-
ture and dust.
4. Display prominent warning signs in studios, alerting personnel that
robotic equipment is present and may move without warning.
5. Ensure personnel remain a minimum of 1-metre (40 inches) clear of
robotic equipment during use.
6. Operators must familiarize themselves with the resulting working enve-
lope of the robotic head including all ancillary equipment (lens, zoom and
focus controls, viewfinder, prompter etc.).
7. Only operate a pedestal remotely if you are able to see it, to avoid obsta-
cles and collision hazards.
8. Maintenance beyond that detailed in this Operators Guide must be per-
formed only by competent personnel in accordance with the procedures
laid down in the Technical Manual.