Vinten Radamec Fusion FCS-16 - Manual (Page 25)

23
The Fusion FP-145 pedestal will drive itself at 45° across the target while optically scanning the floor to
determine the datum position. When the pedestal stops moving the targeting function is complete.
The SP-2000 pedestal will reposition and align itself to the floor target. When the pedestal stops moving
the targeting function is complete.
Configure the grid display
The appearance of the grid display (24) can be customized to increase or decrease the number of grid rows
and columns displayed per page. Displaying more columns and rows per page will reduce the size of the shot
thumbnails.
To configure the grid display, proceed as follows:
1. Select MENU (35) > CONFIGURATION > GRID SIZE (54)
2. Select from the listed rows x columns display options down the left hand side of the grid configuration
screen (Fig 8).The preview panel to the right displays the selected option.
3. Select OK.
Note: To exit without performing either an ENABLE or TARGET command, select RETURN.
Note: The minimum number of rows displayed per page is 2, producing 3 columns (2 x 3). The
maximum number of displayed rows per page is 8, producing 8 rows (8 x 8). A show can
extend over multiple pages. Displaying more rows per page will reduce the size of the shot
thumbnail images.
Fig 8 Grid size configuration screen