Vinten Radamec Fusion FCS-16 - Manual (Page 26)

24
The grid display headers (23), (37) allow shots to be identified by their unique position in the grid display. These
headers are particularly useful when the show extends over multiple pages.
To turn these display headers on or off, proceed as follows:
1. Select MENU (35) > CONFIGURATION > DISPLAY HEADERS (55).
Repeatedly selecting the display headers button (55) will toggle the function on and off. If the button (55)
is coloured blue, then the function is active and headers will be displayed.
When a show extends over multiple pages, the grid display can be scrolled up and down using the PAGE UP
(27) and PAGE DOWN (26) buttons.
Use a show
A ‘show’ is a collection of stored shots from up to 16 camera units, saved in one file. To store shots in the grid
display, either create a new show or load an existing show.
Create a show
To create a new show, proceed as follows:
1. Select MENU (35) > SHOW MANAGEMENT > NEW SHOW.
2. Use either the keyboard, or the touch screen keyboard to enter a name for the new show.
3. Select ENTER.
The Main Screen (Fig 3) is displayed, presenting the first page of the new Show. It is now possible to
store shots in this Show.
Load a show
To load an existing show, proceed as follows:
1. Select MENU (35) > SHOW MANAGEMENT > LOAD SHOW.
2. Select the desired show from the scroll list.
3. Select ENTER.
The Main Screen (Fig 3) is displayed, presenting the first page of the loaded.
List shows
To list stored shows, proceed as follows:
1. Select MENU (35) > SHOW MANAGEMENT > LIST SHOWS.
2. View the stored shows on the scroll list.
3. Select CANCEL.
4. Select OK to return to the main screen.
Note: The name of the new Show is displayed at the top of the screen (38).
Note: The name of the new Show is displayed at the top of the screen (38).