Vinten Radamec Fusion FHR-100 - Manual (Page 26)

Fusion FH-100 and FHR-100 pan and tilt heads
24
Connecting the FVR box to the FH-100 VR head
The VR interface cable provided (part no. V3990-5213) with the FVR box should be connected
between the FVR connector [9] on the back of the FH-100 VR and the Head connector on the
FVR box (Fig. 11).
USB connection
A laptop or server/ PC can be connected to the USB port [15], using a USB system configuration
cable (part no. D200-103) to run the Vinten Radamec Fusion Setup and Test software tool (see
Fig. 13) to configure and set the head pan and tilt limits.
Fig. 11 FH-100 VR head to FVR box connection