Vinten Radamec Fusion FHR-100 - Manual (Page 8)

Fusion FH-100 and FHR-100 pan and tilt heads
6
Warning symbols
WARNING!
Where there is a risk of personal
injury or injury to others,
comments appear supported by
the warning triangle symbol.
Where there is a risk of damage to the
product, associated equipment, process or
surroundings, comments appear preceded by
the word ‘CAUTION!’.
ELECTRIC SHOCK
Where there is a risk of electric
shock, comments appear
supported by the hazardous
voltage warning triangle symbol.
FINGER TRAP
Where there is a risk of trapping
fingers within parts of the product
or other equipment mounted to
the product, comments appear
supported by the finger trap
symbol.
READ INSTRUCTIONS
On encountering the warning
triangle and open book symbols it
is important that you read this
operators guide before using this
product or attempting any
adjustment or repair.
Usage
These products are designed for use within
television studios to support and balance a
camera and other ancillary equipment with a
total weight of up to 45 kg (100 lb). The Fusion
FH-100 and FH-100 VR pan/tilt heads allow
operators to robotically or manually control
camera pan and tilt movements. The Fusion
FHR-100 pan/tilt head can only be operated in
robotic mode.
The total payload must not be exceeded.
The product is intended for use by television
camera operators trained to use Vinten
Radamec robotic equipment.
!
CAUTION
finger trap
!
Disposing of used electrical
and electronic equipment
When you see this symbol on
a Vinten Radamec product it
indicates that this product
must not be disposed of with
household waste. In some
countries or EC regions,
separate collection systems
have been set up to handle electrical and
electronic waste products. This product must
be disposed of at a collection point for the
recycling of such equipment.
By ensuring this product is disposed of
correctly, you will help protect human health
and conserve natural resources and the
environment. For more information about
disposing of this product, visit
www.vintenradamec.com.
WARNING!
1. DO NOT attempt to use
this product if you do not
understand how to
operate it.
2. DO NOT use this product
for any other purpose
than that specified in this
Usage statement.
3. Maintenance beyond that
detailed in this Operators
Guide must be performed
by competent personnel.