Vinten Radamec HS-2010MED Pan & Tilt Head - Manual (Page 12)

HS-2010MED Safety & Introduction
1-2 User Manual
Safety
Safety issues including important warnings, risks and related topics are covered
in this section of the manual. It is very important that this information be avail-
able to all personnel who will work on or near the AutoCam equipment.
Very Important Warnings
ALWAYS set the tilt axis horizontal and insert the tilt locking
pin before removing any part of the payload equipment.
Know the location of the power switch on the head.
Before removing the camera or other payload equipment
from the head, ALWAYS set the column of the pedestal to its
minimum height (refer to the user manual for your pedestal).
ALWAYS engage the locking pins or latches to prevent the
column from rising (refer to the user manual for your pedestal). Turn the
power OFF at the head AND at the pedestal if it is a robotic model.
NEVER work directly under the camera if the pedestal col-
umn is raised. In the unlikely event that the gas pressure sup-
porting the column is lost, the head and payload may drop
quickly.
NEVER attach cables to the head or the camera which could
pull the pedestal over if it is moved with the column extended.