Vinten Radamec HS-2010MED Pan & Tilt Head - Manual (Page 19)

HS-2010MED Safety & Introduction
User Manual 1-9
construction. The high gain digital/analog servo amplifiers provide swift motor
response. This combined with an extremely rigid mechanical design allows tight
damping without oscillation or overshoot.
Control of zoom and focus is possible with full servo studio and ENG lenses. In
the case of an ENG lens, the HP-ZFSLD Lens Drive may be attached to provide
motors and follow pots for servo operation. The full zoom and focus ranges are
covered at a proportional speed in a minimum of one second, dependent on lens
type.
HS-2010MED Specifications
Weight 48 kg (105 lb)
Payload 90 kg (200 lb)
Pan Range 359°
Tilt Range (typical) ±20° (may be reduced by actual pay-
load and CG balance adjustments)
Note: The electrical range of the tilt
servo is ±180°
Accuracy 90 arc secs
Angular Acceleration 180°/sec 2
Angular Velocity (max) 60°/sec
Angular Velocity (min) 0.1°/sec
Height 24” (61 cm)
Width 20” (51 cm)
Depth 10” (25 cm)
Mounting Pedestal
Servo Type Digital with brushless DC motor
Gear-train Type Self lubricating, anti-backlash