Vinten Radamec HS-2010MED Pan & Tilt Head - Manual (Page 34)

HS-2010MED Operation
2-10 User Manual
Pan And Tilt Brakes
WARNING: NEVER use the pan or tilt brake in Robotic
mode. You will cause serious damage.
If the head is correctly balanced (see Chapter 3), you should not need to use the
pan and tilt brakes at all. Due to the risk of damage if the brakes are left engaged
by mistake, the best practice is to always leave the brakes disengaged.
The pan brake lever is located under the housing and is shown in the disengaged
position. Flip the lever to the opposite side to engage the brake.
Pan Brake Lever
Off ---- On