Welch Allyn CP 100 12-Lead Resting Electrocardiograph - User Manual - Manual (Page 28)

24 Chapter 2 Setting Up the Electrocardiograph Welch Allyn CP 100 Electrocardiograph
Connecting an External USB Printer (Optional)
If desired, you can connect an external printer. It must be a USB inkjet or laser printer that
supports PCL (printer control language), such as the following:
No special software is required.
The external printer prints the following (always in black and white):
• Auto ECG reports
• Device settings
• Help pages
Rhythm ECGs always print to the internal printer.
See the warning regarding signal I/O connectors on page 15 .
To Connect a Printer
Connect one end of a USB cable to the printer’s USB connector, and connect the other
end to the electrocardiograph’s USB connector:
. For connector location, see Figure 5
on page 8.
To learn how to enable the external printer in the settings, see “Reviewing the Device
Configuration Settings” on page 27.
Vendor Model PCL Version
HP Deskjet 995c PCL 3
HP Deskjet 5650 PCL 3 enhanced
HP Laser 1022 PCL 5E
Dell Laser 1710 PCL 5E & PCL 6
Lexmark Laser E240 PCL 6