Welch Allyn CP 100 12-Lead Resting Electrocardiograph - User Manual - Manual (Page 53)

Directions for Use Chapter 5 Performing ECG Tests 49
Recording a Normal Auto ECG
For a normal Auto ECG, you enter patient data and do other optional tasks before printing,
as shown in
Figure 31 on page 48.
To Record a Normal Auto ECG
1. Press the Auto ECG key quickly.
Do not hold it down, or a stat ECG would begin.
The following screen appears.
Figure 32. “Enter New Patient” Screen
2. Enter the patient data.
3. When finished, select Done (at the end of the list).
The Auto ECG Acquisition screen appears. See Figure 33 on page 50.
Enter New Patient
9:17AM Oct 16 08
For details about these data fields—
including how to choose which fields
display and print—see
“Reviewing the
Patient Data Fields Available” on page 37.
Patient ID
Last Name
First Name
Birth Date
Weight
Height
Gender
Use up and down arrows to change fields
/ / MM / DD / YYYY
ft. in.
lb.