Welch Allyn CP 100 12-Lead Resting Electrocardiograph - User Manual - Manual (Page 57)

Directions for Use Chapter 5 Performing ECG Tests 53
Recording a Stat Auto ECG
A stat Auto ECG is an immediate printout.
Stat mode bypasses patient data entry, as shown in Figure 31 on page 48. A temporary
ID number is assigned to the patient to identify stat tests.
To Record a Stat Auto ECG
1. Press and hold the Auto ECG key .
The electrocardiograph begins acquiring ECG data. After it has acquired 10 seconds of
quality data, it prints a report.
2. Go to Step 4 on page 50.