Patient preparation, Holter procedure patient preparation, Preparing for electrode placement on patient – Welch Allyn Holter System - User Manual User Manual
Page 17
Directions for Use
13
Patient Preparation
Holter Procedure Patient Preparation
When making the appointment, tell the patient:
•
Do not remove any electrodes or disconnect lead wires.
•
Do not swim, bathe, or shower during the recording period.
•
Do wear loose fitting, comfortable clothing to the appointment (shirt-and-pants or
blouse-and-skirt combinations are better than one-piece garments.)
Preparing for Electrode Placement on Patient
WARNING Safety—Leave 5 feet (1.5 meters) of open area around the patient
during recorder hookup and removal.
WARNING Safety—Do not connect external devices to the recorder. Connect
patient lead wires only to the patient electrodes.
WARNING Safety—Keep the recorder and patient cable clean, especially the
components that touch patients.
Caution Verify that dates on applicable accessories have not expired.
Table 1. Recommended accessories
Accessory
Quantity
Electrodes
5 or 7
AA Alkaline Batteries (LR6)
1 for HR 100
2 for HR 300 & HR 1200
Disposable Safety Razor
1
Abrading pad
1
Alcohol Prep Pads
2
Pouch
1
Patient Diary
1