Welch Allyn Holter System - User Manual - Manual (Page 50)

46 Directions for Use Welch Allyn Holter System
The calibration width represents a 100 msec marker. Diagnostic strips contain additional
tick marks that are 3 seconds apart. These markers are located at the top of each
diagnostic strip presentation. Each strip contains the time of day, day of the week, strip
type and heart rate at a minimum. For some types of strips, additional information is
presented such as Pause duration, ST Level and Run length with Run heart rate.
Forms
The Forms Page represents the form or clusters that were created. Each form indicates a
form count, form classification, and the number of beats in the form. A representative
example is shown for each form. Forms can be based on any combination of channels
processed.
Full Disclosure
The Full Disclosure can be printed out in several different formats of 10, 30 and
60 seconds per line. Channel indicators are displayed in the lower right footer to indicate
which channels are used.