Industrial Injection LB7 Duramax Dual Feed Line - Manual (Page 6)

6
Step 13:
Reinstall the fan belt, refill the antifreeze
(figure 18), hook up the air intake to the turbo,
reattach the air filter, Reinstall engine
nameplate, and hook up the batteries.
Note:
Double check all of the connections,
fuel lines, and junction block to the injection
pump before starting the truck.
(figure 18)
Thank you for your continued business with Industrial Injection Services. We look
forward to working with you in the future. If you have any questions or concerns please
feel free to contact us:
Industrial Injection Service
1201 South 700 West
SLC, UT 84104
(801) 972-0476
Or visit us on the web at:
www.industrialinjection.com
© 2007 Industrial Injection Service-All Rights Reserved