Xcopy ready, Formatting the hard drive – NextoDI NVS2525 User Manual

Page 10

Advertising
background image

13

NVSPRO+ INTERFACE

FORMATTING THE HARD DRIVE

14

4. The LCD Display

① Remaining capacity of the internal hard disk.

If the capacity of the internal hard disk is uncertain, the display will be grayed

out. A capacity check will be performed automatically during power on or

power off. The capacity check can also be activated from the menu.

If an external hard drive is connected to the NVSPRO+, the capacity of external

hard drive will be displayed next to the capacity of the internal hard drive.

② Remaining capacity of the rechargeable battery

The battery capacity is displayed four ways: (321empty) by the battery

gauge.

9. Formatting the Hard Drive

The hard disk in the NVSPRO+ should already be formatted with the"FAT32" file

system. Only one (or the first) partition can be used.

Do not attempt to format the NVSPRO+ disk with a computer. Use only the format

function on the NVSPRO+. This will allow the hard disk to be read by either

the Windows or Mac operating systems.

145.0 GB

XCopy Ready

Menu

Off

Caution

The NVSPRO+ can work only with one partition in the file format

"FAT32". Therefore, NVSPRO+ offers users the function for formatting

the hard disk in the"FAT32 file system ".

149.0 GB

Preview

Select

Back

HDD Management

Buzzer

On

SectprRecpvery

Sync
Language
Firmware Update

Index AutoGen.

On

To Format a New Hard Disk

The NVSPRO+ must not be connected with a computer via USB or IEEE 1394b

(FireWire 800). Remove any memory card or USB device.

③ Current status of the device.

④ Available functions for the current screen. The display varies depending on

the function in use.

(Full): 80% ~ 100%
(2nd Gauge): 30% ~ 80%
(1st Gauge): 5% ~ 30%
(Empty): Under 5%

To re-partition/format the hard disk, press

the control key once at the [XCopy Ready]

mode to get to the menu ("S-Menu"). Move

the highlighted cursor to the [HDD

Management] menu by pushing the control

key downward. Press the control key once to

select [HDD Management].

Move the highlighted cursor to the [Format]

menu option with the control key.

Press the control key once to select

[Format].

149.0 GB

HDD Management

Select

Back

Format

HDD Info

Self Test

TMP Folders

● Once the capacity counter has

decreased, it will not increase until fully

charged

Reference

Advertising