NextoDI NVS2525 - Manual (Page 21)

35
ADVANCED FUNCTIONS ADVANCED FUNCTIONS
36
17. Advanced Functions
NVSPRO+ has several advanced function menus, accessible from the Main Menu.
Menu Operation
Capacity
Check
Self Test
Delete
TMP folder
Buzzer
Language
Selection
Firmware
Upgrade
Checks the used capacity and the remaining recordable
capacity on the NVSPRO+ hard drive.
Built-in test utility for detecting physical errors on the
internal hard drive.
This function does not fix errors.
If an error is detected during the self-test, consult
your authorized NEXTODI dealer.
If the copy function fails, a TMP folder will be generated.
A user can delete the TMP folder using this menu.
On/Off setting for buzzer sound. Factory setting is On.
Change the language setting.
Upgrade to new firmware with the firmware file stored
in the internal hard drive or on a memory card.
1. Capacity Check
HDD Info
Total: 149.0Gb
Capacity Check
149.0 GB
Select Back
Used: 37.9 Mb
149.0 GB
Cancel
Capacity Check
Checking
149.0 GB
Preview
Select Back
HDD Management
Sector Recovery
Buzzer Off
Sync
Language
Firmware Update
Index AutoGen. Off
Select “HDD Management” from the main
menu.
Select “HDD Info” submenu from the “HDD
Management” menu.
The NVSPRO+ will show the capacity status of
the internal hard drive using a pie diagram.
Select OK by pressing the control key briefly
[S].
The capacity check will then begin.
149.0 GB
Cancel
HDD Management
HDD Info
Self Test
TMP Folders
Format
Select
145.0 GB
XCopy Ready
Menu Off
Press the control key briefly [S] in order to
get to the main menu.
Enter Main Menu