NextoDI NVS2525 - Manual (Page 6)

05
CONTENTS OF THE NEXTO VIDEO STORAGE PRO+ SYMBOLS USED IN THIS DOCUMENT
06
2. Plus 1 Pack
① Carrying bag for storing NVSPRO+ and Accessories.
② Leather case for attaching external eSATAp hard drive to NVSPRO+
③ External battery supplies power for both the NVSPRO+ & eSATAp hard drive.
When recharging the internal battery, use the AC adapter that is provided.
The internal battery of the NVSPRO+ is not used when the external battery is
connected.
④ External battery cable for connecting the external battery to the DC-In slot of
the NVSPRO+
⑤ CF card adapter for using CF with NVSPRO+
⑥ eSATAp external hard drive can be connected to a computer using either eSATA
or USB
⑦ eSATAp cable deliver both power and eSATA signal
3. Symbols Used in This Document
Warning
Caution
Reference
The flash icon in a triangle is used to alert you to
personal injury hazards such as electric shock
An exclamation mark in a triangle indicates important
instructions in this operating manual which must be
observed.
The "hand" icon gives you special tips and notes on
the operation.
4. Safety Instructions
Caution
In case of any damage due to failure to observe these operating
instructions, the warranty is voided. NextoDI does not assume liability
for consequential damages. Nor do we assume liability for damage
to property or personal injury caused by improper use or failure to
observe the safety instructions. The warranty is void in any such case.
The following safety instructions and warnings are not only to protect
you, but also to protect the device. Please read the following
warnings:
Warning
● Unauthorized conversion and/or modification of the product is
forbidden for safety reasons.
● Never open the product. This device is not user serviceable.
● Damaging the Li-Poly rechargeable may result in explosion or fire!
● Maintenance, or repairs may only be carried out by authorized
repair center.
● The AC power adapter unit is intended for use in dry conditions to
avoid electric shock!
②
⑤
③ ⑥
Warning
The output voltage of the external battery and the AC adapter is 12VDC.
Use the AC adapter and the external battery only with the NVSPRO+.
Connecting the external battery or AC adapter to the eSATAp hard drive
or USB drive could cause damage to the hard drive or loss of your data.
①
④ ⑦