NextoDI NVS2525 - Manual (Page 28)

49
EXAMPLES OF BASIC FUNTIONS
1. Copying from an SxS card
19. Examples of Basic Functions
145.0 GB
XCopy Ready
Menu Off
SxS Card
102.3 GB
Cancel
Detected SxS
Checking...
(5) If the copy is successfully completed, the result
will be shown on the LCD. Remove the SxS card
to return to the initial “XCopy ready”mode.
2. Copying a Cardbus memory card (including P2/P2E cards)
Copy Done
Remove SxS
16/16 3.6 GB
98.7 GB
Off 10.7 MB/s
Copy Success
145.0 GB
XCopy Ready
Menu Off
The Memory card slot for a CardBus-type memory
card (including P2/P2E) is located on the top of the
NVSPRO+. Insert the CardBus memory card into the
slot. The remaining procedure is the same as for SxS
memory cards.
CardBus Memorycard
(including P2/P2E card)
Copying
4/16 20.1 GB
102.3 GB
Cancel 0m30s
SxS
EXAMPLES OF BASIC FUNTIONS
50
CF Card Adapter
3. Copying a CF card
145.0 GB
XCopy Ready
Menu Off
Copying a CF card is the same as copying an
SxS card--except that the CF card requires
the CF card adapter which is delivered with
the NVSPRO+.
First, connect the CF card to the CF card
adapter, then insert the card into the Express
Card slot of the NVSPRO+.
The NVSPRO+ will display an error message
if an empty CF card adapter is inserted.
CF Card
3.6 GB
16 Files
Copy SxS?
Fase Copy
Copy & Verify
Safe Copy
105.9 GB
Cancel Ok
SxS
(1) Turn on the NVSPRO+ by pressing the power
button for more than 2 seconds. Wait for the
“XCopy ready ”mode, then insert an SxS card
into the ExpressCard slot located on the left
side of the device.
(2) The NVSPRO+ detects the memory card and
analyzes it.
(3) The result of the backup analysis is shown
on the LCD. The total number of files--
in addition to the data capacity of the SxS
card -- is shown on the LCD. The NVSPRO+
will wait for the completion of the backup
analysis before starting to copy.
(4) The copy status is shown on the LCD.