Nextteq VeriFit Irritant Smoke Generators for Respirator Fit Testing - Manual (Page 16)

Page 13 of 24
VeriFit Irritant Smoke Generators Manual
Nextteq LLC 8406 Benjamin Road, Suite J, Tampa, FL 33634 USA
PN 50811300-340N Rev F 5/09
MSDS
Melting Point: -22.36°F
Volatility: N/A
Specific gravity: 2.23 g/cm 3 (at 68°F)
Solubility: N/A
Hydrogen Chloride
Appearance: Colorless to slightly yellow gas, irritating odor
Boiling Point: -121°F
Melting Point: N/A
Specific Gravity: N/A
Vapor Pressure: 40.5 atm
Solubility in Water: 37% by weight @ room temperature
Vapor Density: (Air=1)= 1.268
N/A = Not Available
Part 4 - Fire & Explosive Data
Flash Point & Method: N/A
Auto Ignition Temp. °F: N/A
Flammability Limits In Air Volume %
Lower: N/A
Upper: N/A
Extinguishing Media: Use extinguishing media appropriate for the
material that is burning.
Special Firefighting Procedures: Firefighters should use SCBA units
to protect against possible toxic decomposition products and wear
protective clothing. If there is a fire around the area where tubes are
stored, move the tubes or cool the tubes by dousing with a
large amount of water. Do not put water on tubes that have been
crushed or broken.
Unusual Fire and Explosion Hazards: Fire encompassing the tubes will
emit toxic fumes of chlorides. Violently reacts with water to generate
heat. Generates smoke with moisture in air. Mixing with alkali metal
may result in an explosion.
N/A = Not Available