Nextteq VeriFit Irritant Smoke Generators for Respirator Fit Testing User Manual

Page 21

Advertising
background image

Page 18 of 24

VeriFit Irritant Smoke Generators Manual

Toll free: 877-312-2333 / Toll free: 877-312-2444 www.nextteq.com

PN 50811300-340N Rev F 5/09

Operating Instructions

V. OPERATING INSTRUCTIONS

A. Recommended Usage
Nextteq recommends the following in regards to use of VeriFit Irritant

Smoke Generators:
1. Qualitative Respirator Fit Testing be performed at the following

intervals:

a. At time of initial respirator selection and fitting

b. Annually after the initial fit testing or other successful

qualitative fit test

c. Whenever the respirator becomes “unacceptable” to the

employee and the employee properly notifies the employer

of the condition. A respirator may be unacceptable if it

causes irritation or pain to the employee or if because of

discomfort the employee is unable to wear the respirator

for the time required.

2. After being checked by the test administrator, the test subject

should wear the respirator for approximately 10 minutes before

starting the fit test.

3. The test subject should not be requested to make any head or

facial movements until after the following has occurred:

a. The smoke generator has been brought within the OSHA 29

CFR 1910.134 specified distance from the test subject.

b. The smoke has been delivered.

c. No leakage of the respirator has been detected. At the

time the test administrator starts to deliver smoke to the

test subject and at the time the test subject is requested

to commence making head or facial movements, the test

administrator should be extremely alert and aware of any

slight indication of the test subject’s reaction to the smoke.

B. Required Steps before Smoke Generation
1. Before using this product, read, understand, and comply with

all labels, warnings, instructions, and other literature

accompanying the product including but not limited to this

manual, the MSDS in this manual (also available as PN 50811320-

340N), and the Sensitivity Check Protocol (PN 50811340-340N

- see www.nextteq.com).

Advertising