Petsafe petPod™ Digital Pet Feeder - Manual (Page 6)

5
POWER & SET continued
To change the minutes press the + button,
again when the minutes are correct press
ENT. The day of the week now fl ashes,
default is MON, press the + button to alter
the day. Pressing ENT again goes back
to the beginning, with the hours fl ashing.
When the time and day are correct press
SET, this now enters TIMER 1 set mode.
TIMER 1 (left hand lid
opening) SET MODE
This is indicated by the SET indicator
and TIMER 1 indicator fl ashing. The hour
position should also be fl ashing. To change
the hours press the + button. When the
hour is correct (12 hour clock with AM/
PM indicator), press the ENT button this
starts the minutes fl ashing. To change the
minutes press the + button, again when
the minutes are correct press ENT. The day
of the week now fl ashes, default is MON,
press the + button to alter the day. Note
that after SUN there is a DAILY indicator.
When DAILY is set the timer (left hand lid)
will activate at that same time every day.
Please note if you choose this option in
TIMER 1, TIMER 2 is automatically set to
daily also as default (you have the option
to alter the time of opening). Pressing ENT
again goes back to the beginning, with
the hours fl ashing. When TIMER 1 time
and day is correct press SET which enters
TIMER 2 set mode. (TIMER 2 needn’t be set
if you don’t require the second tray. If this
is the case, press SET again to enter run
mode. See page 6).
TIMER 2 (right hand lid
opening) SET MODE
This is indicated by the SET indicator and
TIMER 2 indicator fl ashing. The hour position
should also be fl ashing. To change the
hours press the + button. When the hour
is correct (12 hour clock with AM/PM indicator),
press the ENT button this starts the minutes
fl ashing. To change the minutes press
the + button, again when the minutes are
correct press ENT. The day of the week
now fl ashes, default is MON, (unless DAILY
has been sent in TIMER 1 then DAILY is the
ONLY option for TIMER 2. There is no DAILY
option available separately with TIMER 2,
you only have the option of altering the
timer opening time).
Timer
1
Day selector
Timer 1 & 2 display
Timer
2
AM
PM