OFNA Racing CD3 RTR - Manual (Page 14)

M3x10mm
Flat Head
Hex Screw
38520
Brake Mount
(Lower)
ASSEMBLY OF THE TWO SPEED ONTO CHASSIS
M3x30mm
Flat Head
Hex Screw
M3x25mm
Flat Head
Hex Screw
M3x25mm
Flat Head
Hex Screw
Center Drive Shaft
(Long/Front)
Center Drive Shaft
(Short/Rear)
2-Speed Assembly
Brake Mount
Assembly (Upper)
38527
38527
*Insert the center drive shaft
before assembly the two speed
onto chassis.
Screw
M3X8mm
Screw
M3X8mm
Screw
M3X10mm
Screw
M3X10mm
Screw
M3X8mm
Washer
M3X8mm
Washer
M3X8mm
Washer
Radio Tray
Servo Post
Servo Post
Servo Post Washer
Servo Post Washer
38517
38520
38520
38520
38520
Steering Servo
Steering Servo After Assembly.
37360
4mm
Ball & Socket
10768
Steering
Servo Horn
Use the screw
from your servo.
90 Degree
Align the servo horn in 90 degree.
ASSEMBLY OF THE STEERING SERVO
94002
M3X8mm
Screw
94003
M3X10mm
Screw
M3x10mm
Flat Head
Hex Screw
M3x30mm
Flat Head
Hex Screw
M3x25mm
Flat Head
Hex Screw
Note:
Use M3x30mm flat head screw
only in this position.
The mark on the center
drive shaft is used for the front.