OFNA Racing CD3 RTR - Manual (Page 16)

37967
P3
O-Ring
(2 pcs)
P12 O-Ring
38331-GRAY
Adjust Nut(Gray)
37650
4mm
Ball End
Piston
Shock Shaft
Shock Oil
Pull down piston
and pour oil into
shock cylinder.
Remove air bubbles
by slowly moving
piston up and down
several times.
2mm
E-Ring
37967
C-Ring
37967
Washer
(Block)
Use a little shock oil to
lubricate o-rings before
screwing on adjusting nut.
ASSEMBLY OF THE LEXAN SHOCK ABSORBERS
FILLING THE SHOCKS WITH OIL
Oil Oil
37965
Alum Shock Body
38325
37100
37966
Use the No.2 for two hole
piston from shock plastic
tree.
*Insert the o-ring
into the groove
of the adjust nut.
* Use the short ball end .
The C-Ring must fit
into the groove.
Step 1
Step 2
Ball End
( Short)
Pressure Top
Shock Spring
Spring Holder
Shock Cap
(Gray)
ASSEMBLY THE SHOCK SPRING
38330 GRAY
37100
37080
38326
37100
Use the short shock
ball end.
Pull down piston
and pour oil into
shock cylinder.
Remove air bubbles
by slowly moving
piston up and down
several times.
37070
3mm O-Ring
37070
3mm O-Ring
37070
3mm O-Ring
Clear Lexan
Shock Body
37100
Front Cap
37650
4mm
Ball End
Piston
Shock Shaft
Shock Oil
Pressure Top
Shock Cap
(Gray)
Spring collar
Spring
tension adjust
Ball end
Shock Spring
Spring Holder
2mm E-Ring
2mm E-Ring
2mm E-Ring
39030
38325
37100
37080
38330
Use the No.2 for two
hole piston from
shock plastic tree.
Use the short ball end .
FILLING THE SHOCKS WITH OIL
Oil Oil
37100
37100
38326
37100
ASSEMBLY THE SHOCK SPRING
ASSEMBLY OF THE ALUMINUM CNC SHOCK ABSORBERS
(USED ON SPORT RTR MODELS)
(USED ON PRO RTR MODELS)