Assembly of the exhaust system – OFNA Racing CD3 RTR User Manual
Page 22
Advertising
M3x10mm
Screw
3x8mm
Washer
Muffler Stay
Silicone Tube
Tuned Pipe
Nylon Strap
(Middle)
Nylon Strap
ASSEMBLY OF THE EXHAUST SYSTEM
38514
38438
38531
5x4mm
Set Screw
ASSEMBLY OF THROTTLE HORN INTO SERVO AND BRAKE LEVER
THROTTLE
SEVRO
Screw
Use the screw provided
from your servo.
* Align the throttle servo horn in 90 degree.
* Attach the throttle ball end onto
the throttle ball on the carburetor
38401
Air Filter Holder
Insert the filter into air filter
holder.
Apply filter oil to the sponge
before use.
94003
Advertising