Sangean U4 DBT (V1) - Manual (Page 12)


Battery charging status indicator
Please note that the battery charging status detection can only
be activated when the radio is in charging mode (i.e. the radio is
switched off, the battery switch slides to the NiHM position and it is
connected to the AC mains socket).
When charging is in progress, dis-
play is shown at right and the charging
indicator flashes yellow.
When the charging process is com-
pleted, display is shown at right and the
charging indicator lights in steady yellow.
If batteries are already fully charged,
display is shown at right and it will
switch to standby mode after 5 sec-
onds.
When there is no battery/missing bat-
teries in the compartment or some of
batteries are inserted with the incor-
rect polarity, display is shown at right
and it will enter standby screen after 5
seconds.
Note: If a battery is removed while
charging, display is shown at right and
the charging indicator lights red.