Sangean U4 DBT (V1) - Manual (Page 27)

6
GB
Listening to music via Bluetooth streaming
You need to pair your Bluetooth device with your radio before you
can auto-link to play/stream Bluetooth music through yourU4 DBT.
Paring creates a `bond' so two devices can recognize each other.
Pairing your Bluetooth device for the first time
. Press the Power button to switch on the radio.
. Press the Source button to select the Bluetooth mode.
The Bluetooth status indicator ( ) on the panel flashes blue
to show the radio is discoverable.
3. Activate Bluetooth on your device according to the device's user
manual to link to the speaker. Locate the Bluetooth device list
and select the device named ‘U4 DBT”. With some mobiles
(which are equipped with earlier versions than BT. Bluetooth
device, you may need to input the pass code “0000”).
4. Once connected, the Bluetooth icon will remain in solid blue.
You can simply select and play any music from your source device.
Volume control can be adjusted from your source device, or directly
on your radio.
Note:
1) If 2 Bluetooth devices, pairing for the first time, both search for
your radio, it will show its availability on both devices. However, if
one device links with this unit first, then the other Bluetooth device
won't find it on the list.
2) If you take your source device out of range, the connection will
be temporarily disconnected to your radio. Your radio will automatically
reconnect if the source device is brought back in range. Be aware
that during the period of disconnection, no other Bluetooth device
can pair or link with your radio.